Eco Duct Vertical Bend 300 X 70 - 45*
Description
300 x 70 - 45° Vertical Bend Eco Duct Green ( 4 pascals )
UL 181.11-2013 - AS/NZS 1530.3-1999
( ECO300VER45 )
300 x 70mm 45° Vertical Bend — Eco Duct Green | 4 Pa
The ECO300VER45 provides a 45° direction change in the vertical plane on 300 x 70mm low profile Eco Duct installations. Where a duct run needs to transition between different vertical levels — dropping down through a ceiling cavity, rising into a wall space or changing height between floor levels — this fitting delivers a clean, purpose-made bend with minimal pressure loss.
Key Features
- 45° vertical direction change — purpose-made fitting for smooth elevation changes in the vertical plane on 300 x 70mm low profile duct systems
- 4 Pa pressure loss rating — the lowest resistance bend fitting in the 300 x 70mm Eco Duct range, making it the preferred option wherever a vertical direction change is required
- Green colour coded — matches the 300 x 70mm Eco Duct range for fast, error-free identification on site
- AS/NZS 1530.3-1999 compliant — meets Australian and New Zealand standard for ignitability, flame propagation, heat release and smoke release
Suitable For
Vertical elevation changes in 300 x 70mm Eco Duct low profile duct systems — transitioning between ceiling cavities and wall spaces, dropping duct runs down to outlet level, and any installation requiring a smooth 45° change in the vertical plane while maintaining the low profile rectangular cross-section.
Trade note: At just 4 Pa this is the lowest resistance fitting in the Eco Duct bend range — where a 90° vertical change is required, two ECO300VER45 fittings in sequence (2 x 4 Pa = 8 Pa total) is significantly lower resistance than a single ECO300VER90 and should be used wherever space allows.
Specifications
| Part Number | ECO300VER45 |
| Duct System | Eco Duct Low Profile |
| Dimensions | 300mm x 70mm |
| Fitting Type | 45° Vertical Bend |
| Static Pressure Loss | 4 Pa |
| Colour | Green |
| Standard (AU/NZ) | AS/NZS 1530.3-1999 |
